Create Durable Stamped Concrete Surfaces with
LITHOCHROME® Color Hardener

What is LITHOCHROME® Color Hardener: LITHOCHROME® Color Hardener is the ready-to-use, powdered dry-shake hardener used to add color into the surface of freshly placed concrete. It produces a hard, long-wearing, abrasion-resistant surface. LITHOCHROME Color Hardener used in conjunction with LITHOCHROME® Antiquing Release (available in the same colors shown below) is the ideal coloring system for creating realistic, professional quality stamped concrete surfaces. Due to heightened surface density the color-hardened concrete has improved resistance to the effects of freeze-/thaw cycles and de-icing salts. It is ideal for pedestrian or vehicular traffic areas such as malls, retail stores, restaurants, sidewalks, streetscapes, driveways, hotel lobbys, car parks, both indoors or out. Where to use LITHOCHROME Color Hardener: Exterior hardscapes Interior floors Base color for stamping or texturing concrete Compatible Cures and Sealers: COLORCURE® Concrete Sealer LITHOCHROME® Colorwax™ SCOFIELD® Cureseal-W™ SCOFIELD® Cureseal-S™

Download the LITHOCHROME Color Hardener Color Chart. Download the LITHOCHROME Color Hardener Contractor Sheet. Download the LITHOCHROME Antiquing Release Contractor Sheet. Download the LITHOCHROME Color Hardener Tech Data Bulletin.

A-53 Arizona Tan	0266 Ash White*	1138-S Blue Smoke+$$	A-59 Beige Cream*	0568 Blush Beige*	A-26 Brick Red
1139 Burberry Beige*	A-33 Classic Gray	A-27 Dark Red	A-21 Deep Charcoal	A-25 La Crescenta Brown	3611 Oyster White*
A-55 Pecan Tan	A-57 Platinum Gray	A-24 Russet	A-85 Muted Green	A-50 Slate Gray	4948 Smoke Beige*
A-51 Steadman Buff	5183 Stone Gray*	A-29 Terra Cotta	A-28 Tile Red	5921 Walnut	5758 Weathered Sage*

Coverage rates vary with intended use and application. LITHOCHROME Color Hardener should be applied at a rate of 50 lb. (1 bag) per 100 sq. ft. except where indicated by an asterisk (*).
*Denotes colors requiring a higher coverage rate, where Scofield recommends 90-120 lbs. per 100 sq. ft.
+$$ = Check current market price.

Please note: concrete colors shown are approximate. Due to shade variations associated with individual color monitors and printers, we suggest utilization of our literature request form to review an actual LITHOCHROME® Color Hardener Color Chart. We strongly recommend that a test slab be poured and approved prior to starting the job. Test slabs should be poured replicating jobsite conditions.

LITHOCHROME® Antiquing Release

Apply LITHOCHROME Antiquing Release to the entire surface to be textured immediately prior to stamping. Its hydrophobic nature will help prevent the wet cementitious material from sticking to the pattern tool, and improve print quality. See Tech Data Bulletin A-854 for full application instructions.