Concrete Sealers, Curing Compounds and Protective Treatments

SCOFIELD® Selectseal-W™ -	A waterborne, low VOC, clear, acrylic-polyurethane concrete sealer developed for use on multicolored concrete and cementitious surfaces where an environmentally sound product is preferred. SCOFIELD® Selectseal-W™ is a highly durable, one-component, clear, acrylic-polyurethane concrete sealer for use on new or existing concrete and cementitious toppings to improve resistance to staining, abrasion and the effects of ultraviolet (UV) radiation. Sealed surfaces vary in appearance from matte to semigloss depending on substrate porosity and the number of coats applied. Specifically developed to protect the beauty of multicolored surfaces, SCOFIELD Selectseal-W is the recommended sealer for use with LITHOCHROME® Tintura™ Stain or LITHOCHROME® Chemstain® Classic to achieve optimum performance and durability. It is ideal for use over antiqued, imprinted, chemically stained, or exposed-aggregate surfaces. SCOFIELD Selectseal-W may be used on both horizontal and vertical colored or uncolored concrete and cementitious surfaces. SCOFIELD Selectseal-W is formulated for use on interior or exterior concrete and cementitious toppings where a premium-quality, highly durable sealer is desirable. SCOFIELD Selectseal-W is a low VOC, environmentally sound, green building material. It may contribute to earning LEED® credits for Indoor Environmental Quality, EQc 4: Low-Emitting Materials, based on low contribution of VOC. See the current Material Safety Data Sheet for exact VOC documentation. Refer to the most recent Technical Data Bulletin
SCOFIELD® Selectseal-S™ -	A ready-to-use, solvent-based, one-component, clear urethane concrete sealer formulated to seal and protect interior concrete floors and vertical concrete. SCOFIELD® Selectseal-S™ is a premium-quality, one-component, clear, nonyellowing, aliphatic moisture cure urethane concrete sealer that is highly resistant to staining, abrasion and ultraviolet (UV) radiation. It reacts with atmospheric moisture to form an extremely durable film with superior chemical and abrasion resistance characteristics. SCOFIELD Selectseal-S is formulated to seal and protect new or existing, colored or uncolored interior concrete floors, vertical concrete and SCOFIELD® Overlay™ toppings where an exceedingly durable, clear, high gloss or matte finish is desired. An integral part of the Scofield engineered systems for interior floors and vertical concrete, it is ideal for use over antiqued or imprinted decorative concrete surfaces. Refer to the most recent Technical Data Bulletin
SCOFIELD® Repello® -	An environmentally sound, premium quality, invisible, penetrating treatment for protecting horizontal or vertical, porous colored or uncolored concrete and improving durability. SCOFIELD® Repello® is formulated for treating fully cured, porous, interior or exterior colored, multicolored, chemically stained or uncolored concrete where invisible protection from staining is required. Concrete surfaces treated with SCOFIELD Repello are easier to clean and maintain. It reduces damage or discoloration from common spills, such as food, oil, and chemicals, as well as environmental effects from acid-rain, airborne pollution and water penetration. Durability is improved and the treatment provides increased resistance to surface spalling caused by freeze/thaw cycles. SCOFIELD Repello also reduces degradation of the surface appearance from mildew formation, chloride penetration, and efflorescence. Surfaces treated with SCOFIELD Repello remain breathable because the transmission of moisture vapor from the surface is not blocked. An invisible barrier is formed when SCOFIELD Repello penetrates and reacts with the concrete. Since no film is formed, it cannot chip, peel, or flake away, and it will not yellow over time. It wears only as the substrate wears. A unique and proprietary waterborne formulation, SCOFIELD Repello exceeds the performance of traditional clear water repellents or silicate-based products. Unlike other treatments, the unique chemical barrier formed by SCOFIELD Repello exhibits superior resistance to stains from water, spills and contaminants. SCOFIELD Repello is formulated for easy, fast-track installations on interior or exterior, horizontal or vertical areas of cured new concrete construction, and also for refurbishment/renovation projects. It is intended for use above grade, in areas not subject to hydrostatic pressure. Application is done simply and quickly by hand-pump sprayers or rollers. A waterborne formula, it is virtually odor free during application. Within approximately one hour of treatment, the surface is protected from staining, and the performance continues to improve over several days. Warehouse, factory, and many other colored or uncolored, porous concrete interior floors should normally be treated to protect the surface and facilitate cleanup. Applied to these surfaces, SCOFIELD Repello produces excellent results and reduces the need for aggressive ongoing floor maintenance programs. Refer to the most recent Technical Data Bulletin
SCOFIELD® Formula One™ SG -	An economical, chemically reactive, sodium silicate treatment designed to harden the surface and increase the durability and life span of uncolored, nonarchitectural concrete floors and hardscapes. SCOFIELD® Formula One™ SG is a penetrating, transparent or translucent liquid for use on concrete to reduce porosity, protect the surface, reduce dusting, improveabrasion resistance and provide overall long-term durability. It is formulated specifically for use on uncolored concrete. The protective treatment produces a vapor permeable (breathable) finish but is not a sealer. The finished concrete surface is nontoxic, easy to maintain, and environmentally sound after installation. SCOFIELD Formula One SG is an economical solution to providing a longer life for uncolored concrete floors in warehouses, distribution centers, retail stores, shopping centers, and manufacturing sites. It is suitable for interior and exterior concrete surfaces in areas subject to heavy pedestrian use and light utility vehicle traffic. Refer to the most recent Technical Data Bulletin
SCOFIELD® Formula One™ K -	A chemically reactive treatment based on potassium silicate developed to harden the surface, improve the appearance, and increase the durability and life span of architectural concrete floors and hardscapes. SCOFIELD® Formula One™ K is a penetrating, colorless, transparent liquid for use on concrete to reduce porosity, protect the surface, reduce dusting, significantly improve abrasion resistance and provide overall long-term durability. The low-odor material is a cost-effective treatment that also provides improved chemical resistance and a higher surface compressive strength. It helps reduce water permeability, reducing the absorption of water-soluble materials known to be harmful to concrete. It significantly extends the nominal service life of concrete floors. SCOFIELD Formula One K is formulated for improved compatibility with colored concrete. It is also suitable for use on uncolored concrete. The protective treatment produces a breathable finish that enhances the natural beauty of the concrete surface, but is not a sealer. When it is applied to concrete, the surface remains vapor permeable (breathable), although liquid water permeability is significantly reduced. The finished concrete surface is nontoxic, easy to maintain, and environmentally sound after installation. SCOFIELD Formula One K is an economical solution to providing a longer life for concrete floors or hardscapes of all types. SCOFIELD Formula One K does not contain sodium silicate. If used properly, it will not leave the whitish surface bloom characteristic of nonarchitectural sodium silicate products. This product is ideal for use on concrete floors in warehouses, distribution centers, retail stores, shopping centers, manufacturing sites, stadiums and arenas. It is suitable for interior floors and exterior hardscapes in industrial, commercial, public and retail buildings in areas subject to heavy pedestrian use and light utility vehicle traffic. Refer to the most recent Technical Data Bulletin
SCOFIELD® Formula One™ Lithium Densifier & Finish Coat System -	A chemically reactive, colorless treatment system designed for use in the production of ground and polished architectural concrete. The SCOFIELD® Formula One™ Lithium Densifier and Finish Coat System is a VOC-compliant, cost-effective treatment that will extend the nominal service life of concrete floors and reduce floor maintenance costs. SCOFIELD® Formula One™ Lithium Densifier is a penetrating, transparent liquid for use on concrete surfaces during the grinding and polishing process to more rapidly produce a terrazzo-like floor surface with improved abrasion resistance, higher surface compressive strength and reduced dusting. SCOFIELD® Formula One™ Finish Coat is used on ground and polished concrete after treatment with SCOFIELD Formula One Lithium Densifier to facilitate final polishing, reduce porosity, and protect the surface by improving chemical resistance and reducing water permeability while remaining vapor permeable (breathable). SCOFIELD Formula One Lithium Densifier used in conjunction with SCOFIELD Formula One Finish Coat is an economical system capable of providing longer life and higher reflectivity (gloss) for ground and polished concrete floors of all types. The treated and finished concrete will provide a surface that is nontoxic, easy-to-maintain, and environmentally sound with a low to moderate sheen. These products do not contain sodium silicate or potassium silicate. When properly installed, this system will not leave the whitish surface bloom characteristic of nonarchitectural silicate products. Refer to the most recent Technical Data Bulletin
SCOFIELD® Cureseal-W™ -	A waterborne, low VOC, environmentally sound, clear curing compound and sealer for freshly placed colored or uncolored concrete flatwork and a durable finish for protecting colored, uncolored, or multicolored concrete hardscapes, floors and cementitious toppings. SCOFIELD® Cureseal-W™ was developed for curing and sealing freshly placed colored or uncolored concrete and sealing new or existing, interior or exterior concrete flatwork or floors topped with SCOFIELD® Overlay™ or SCOFIELD® Texturetop® toppings where a clear, semigloss finish is desired. It is also effective when used as a sealer over antiqued, imprinted, chemically stained, or exposed-aggregate finishes. As a premium-quality, environmentally sound curing membrane, SCOFIELD Cureseal-W offers excellent curing properties and moisture retention while complying with stringent air quality regulations. It produces a clear finish that is resistant to blushing and will not yellow or change the natural color of the concrete. As a sealer, SCOFIELD Cureseal-W helps protect against staining from incidental contact with materials such as automotive oil, grease, and food spills. It produces a low-maintenance film that improves resistance to abrasion, deicing salts, many chemicals, weather, and ultraviolet (UV) radiation. It is helpful in preventing concrete dusting, plastic shrinkage cracking, and spalling. Surfaces sealed and protected with SCOFIELD Cureseal-W are easier to clean and maintain than unsealed concrete. SCOFIELD Cureseal-W is a low VOC, environmentally sound, green building material. It may contribute to earning LEED® credits for Indoor Environmental Quality, EQc 4: Low-Emitting Materials, based on low contribution of VOC. See the current Material Safety Data Sheet for exact VOC documentation. Refer to the most recent Technical Data Bulletin
SCOFIELD® Cureseal-S™ -	A solvent-borne, clear curing compound for freshly placed colored or uncolored concrete flatwork and a durable sealer for protecting horizontal or vertical quarry tile, brick, block, stone, exposed-aggregate, or cementitious surfaces. SCOFIELD® Cureseal-S™ was developed for curing and sealing freshly placed colored or uncolored concrete and sealing new or existing, interior or exterior concrete flatwork or SCOFIELD® Texturetop® toppings where a clear matte or gloss finish is desired. It is also effective when used as a sealer over antiqued, imprinted, chemically stained, or exposed-aggregate concrete surfaces and as a finish sealer over quarry tile, brick, block, or stone. SCOFIELD Cureseal-S produces a clear finish that is resistant to blushing and will not yellow with age or exposure to ultraviolet light, providing significant protection against ultraviolet degradation of the substrate. As a premium-quality concrete curing membrane, SCOFIELD Cureseal-S offers excellent curing properties and moisture retention. As a sealer, SCOFIELD Cureseal-S helps protect against staining from incidental contact with materials such as automotive oil, grease, and food spills. It produces a low-maintenance film that improves resistance to abrasion, freeze-thaw cycles, deicing salts, weather, ultraviolet (UV) radiation, and many chemicals. It is helpful in preventing concrete dusting and spalling. Surfaces sealed and protected with SCOFIELD Cureseal-S are easier to clean and maintain than unsealed concrete. It is used as a sealer on building walls, allowing stains from airborne pollutants such as soot and dirt to be washed away with water. Commercial, industrial, and other interior floors may be cured and sealed with SCOFIELD Cureseal-S to protect the surface and facilitate cleanup. When applied as a sealer on existing floors or on floors topped with SCOFIELD Texturetop, SCOFIELD Cureseal-S serves as the basis for an ongoing floor maintenance program. Refer to the most recent Technical Data Bulletin
SCOFIELD® Revive™ -	A solvent-borne, color-matched, durable curing compound and sealer for improving the color uniformity of concrete surfaces colored with Scofield coloring materials. SCOFIELD® Revive™ was developed for improving the appearance of existing, interior or exterior colored concrete flatwork or SCOFIELD® Texturetop® toppings, especially where there may be color imperfections caused during application or by wear and tear. It may also be used as a curing compound for freshly placed colored concrete. SCOFIELD Revive produces a gloss finish that is resistant to blushing and will not yellow with age or exposure to ultraviolet light, providing significant protection against ultraviolet degradation of the substrate. If a matte finish is required, a finish coat of clear SCOFIELD® Cureseal-S™ Matte may be applied once cured. As a premium-quality concrete curing membrane, SCOFIELD Revive offers excellent curing properties and moisture retention and meets the requirements of ASTM 1315. As a sealer, SCOFIELD Revive helps protect against staining from incidental contact with materials such as automotive oil, grease, and food spills. It produces a low-maintenance film that improves resistance to abrasion, freeze-thaw cycles, deicing salts, weather, ultraviolet (UV) radiation, and many chemicals. It is helpful in preventing concrete dusting. Surfaces sealed and protected with SCOFIELD Revive are easier to clean and maintain than unsealed concrete. It is used as a sealer on building walls, allowing stains from airborne pollutants such as soot and dirt to be washed away with water. SCOFIELD® Traction Additive may be added to improve slip resistance. Refer to the most recent Technical Data Bulletin
CEMENTONE® Clear Sealer -	A waterborne, low VOC, environmentally sound, clear sealer for protecting multicolored, colored or uncolored concrete and cementitious toppings. CEMENTONE® Clear Sealer is formulated for sealing and protecting new or old, interior or exterior concrete hardscapes or floors, and for use on cementitious toppings used for resurfacing concrete, such as SCOFIELD® Texturetop®. Where a low-gloss finish is desired, it is compatible for use on multicolored, antiqued, imprinted, textured, stamped, acid-stained or exposed-aggregate horizontal surfaces to enhance the appearance. It is effective for exterior use in areas not subjected to vehicular traffic, and the sealer is also effective on interior floor surfaces where a commercial floor finish will be used and regularly maintained. CEMENTONE Clear Sealer produces a low-maintenance film that can improve resistance to deicing salts, many chemicals, weather, and ultraviolet (UV) radiation. It reduces surface staining from incidental contact with materials such as automotive oil, grease, and food spills. The sealer is also helpful in preventing concrete dusting and making the surface easier to clean and maintain than untreated concrete. Prior to application of CEMENTONE Clear Sealer, the surface must be carefully prepared (see Tech-Data Bulletin). CEMENTONE Clear Sealer is a low VOC, environmentally sound, green building material. It may contribute to earning LEED® credits for Indoor Environmental Quality, EQc 4: Low-Emitting Materials, based on low contribution of VOC. See the current Material Safety Data Sheet for exact VOC documentation. Refer to the most recent Technical Data Bulletin
COLORCURE® Concrete Sealer -	A color-matched, low VOC, environmentally sound, two-component curing and sealing system for freshly placed concrete flatwork, and an effective sealer for maintaining colored or uncolored concrete floors. COLORCURE® Concrete Sealer is a two-component, color-matched system that enhances the appearance of new or existing concrete. It produces a low-maintenance, easy-to-clean film that improves resistance to abrasion, many chemicals, weather, and deicing salts. COLORCURE Concrete Sealer is a high-quality curing and sealing membrane that complies with stringent air-quality regulations. Developed for curing and sealing new interior or exterior concrete flatwork, COLORCURE Concrete Sealer is recommended for use where color uniformity is desired and regular maintenance is planned. As a curing compound formulated to enhance color development, it retains moisture throughout the entire curing cycle to provide proper strength gain and to reduce shrinkage. As a sealer COLORCURE Concrete Sealer is helpful in preventing concrete dusting and reducing surface staining from materials such as automotive grease, oil, and food spills. As a sealer for refurbishing older colored, chemically stained, or uncolored concrete flatwork, color-matched COLORCURE Concrete Sealer significantly restores the depth of colors and minimizes the appearance of minor superficial scratches, while offering an easy-to-maintain, low-gloss finish with improved stain resistance. COLORCURE Concrete Sealer is a low VOC, environmentally sound, green building material. It may contribute to earning LEED® credits for Indoor Environmental Quality, EQc 4: Low-Emitting Materials, based on low contribution of VOC. See the current Material Safety Data Sheet for exact VOC documentation. Refer to the most recent Technical Data Bulletin
LITHOCHROME® Colorwax™ -	A color-matched, low VOC, environmentally sound, two-component concrete curing material for exterior concrete flatwork. LITHOCHROME® Colorwax™ is a two-component system formulated for curing exterior concrete that has been colored with CHROMIX® Admixtures for Color-Conditioned® Concrete, LITHOCHROME® Color Hardener, or EMERCHROME® Floor Hardener. Color-matched to the concrete color, or used in A-11 Concrete Gray on uncolored concrete, LITHOCHROME Colorwax is an ideal curing material where a uniform appearance is desired and the concrete will be allowed to weather naturally. It allows the concrete to develop its full color potential and brings out the inherent beauty of the surface. For curing, LITHOCHROME Colorwax is a premium-quality, environmentally sound curing membrane that complies with stringent air-quality regulations. Formulated to enhance color development, it retains moisture throughout the entire curing cycle to provide proper strength gain and to reduce shrinkage. Its superior curing properties are achieved with a thin film, reducing material cost. Concrete strength and abrasion resistance are increased while the surface is protected and staining is reduced. The concrete is easier to clean and maintain. An additional thin coat of LITHOCHROME Colorwax may be applied over the initial cure coat to renew the appearance of exterior concrete at the completion of construction or to renew old applications of LITHOCHROME Colorwax after they have weathered or worn away. Refer to the most recent Technical Data Bulletin