LITHOCHROME Color Hardener may contribute to earning LEED® points under the Sustainable Sites category: 7.1 Heat Island Effect, Non-Roof for New Construction, Existing Building, Schools and Core and Shell by having a Solar Reflectance Index (SRI) of at least 29 or greater as measured by ASTM E903 or ASTM C1549.

Below are Solar Reflectance Index ("SRI") values for LITHOCHROME Color Hardener Colors which meet or exceed the LEED requirement.*

Color Hardener color	SRI**
0266 Ash White	69
A-59 Beige Cream	45
0568 Blush Beige	50
1139 Burberry Beige	57
3611 Oyster White	68
4948 Smoke Beige	42
A-51 Steadman Buff	36
5183 Stone Gray	48
5758 Weathered Sage	41
A-56 Venetian Pink	46
A-85 Muted Green	32
5925 Warm Cork***	35
0207 Antique Rose***	69
1037 Chalk Blue***	79
2121 Hacienda Amber***	39
3892 Pistachio Green***	47
5816 Vermillion***	50
5971 Wedgewood Blue***	48
3864 Peruvian Red***	57
2457 Kale Green***	83
2170 Harvest Beige***	50
1005 Caution Yellow***	62
1173 Coconut Crème***	77
6016 White***	71

*Note: these values are derived from application at 120 lb/100 sq ft. Use of lower application rates may affect resulting SRI and/or resulting color.

**SRI values are calculated following ASTM E 903 and E 891 (100-point ordinate method), then the E 1980 SRI calculator following R. Levensen of LBNL using a materials emittance of 0.90 and typical ambient meteorological parameters.

***Non-standard colors.

Scofield's Technical Data Sheet requires that a mockup be done under actual jobsite conditions using each color. Prior to beginning the job itself, each SRI should be determined and approved by a commercial laboratory that is equipped to perform SRI testing in accordance with acceptable ASTM standards.