Navbar for Scofield website
Sika Scofield - Your Partner in Decorative Concrete.
Water-Based Sealers and Cure/Seals
Sika Scofield stained concrete floor Why use a Scofield Sealer:
Scofield sealers protect the surface, enhance the appearance of colored concrete, and may provide protection against contamination and chemical attack by imparting a film-forming layer on the surface of the concrete. This protective layer also adds a measure of abrasion resistance to the concrete surface.

Scofield water-based sealers provide a more natural appearance to the concrete surface, and have little or no odor. Water-based sealers do not penetrate tight surfaces easily. They are sensitive to ambient, material, and surface temperature and moisture. All Scofield water-based sealers are VOC compliant in all states and jurisdictions. Scofield water-based curing compounds and cure/seals aid in the development of the designed concrete strength. They retain water in the concrete to promote proper cement hydration. The use of Scofield cures and sealers can help minimize unwanted cracking such as surface cracking and shrinkage cracking, and allow for the maximum potential of abrasion resistance of the concrete.

SCOFIELD® Selectseal™ Plus
Water-based
Clear
VOC = 90.4 g/L

Tech-Data and SDS

SCOFIELD Selectseal Plus is a high solids, low odor acrylic sealer developed for use on interior or exterior concrete. It offers greater abrasion resistance and very good early water-resistance. It provides minimal depth of color and a gloss finish. SCOFIELD Selectseal Plus meets the moisture retention requirements of ASTM C309, and is VOC compliant in all states and jurisdictions except SCAQMD.

Where to use Selectseal Plus:
Interior or exterior colored or uncolored concrete, including LITHOCHROME® Chemstain® Classic, LITHOCHROME™ Tintura Stain, LITHOCHROME® Color Hardener, SCOFIELD® Texturetop®, SCOFIELD® Revive™ Exterior Concrete Stain, and SCOFIELD® Formula One™ Liquid Dye.

SCOFIELD® Cureseal-W™
Concrete Curing Compound and Sealer

Water-based
Clear
VOC = 96.07 g/L

Tech-Data and SDS

SCOFIELD Cureseal-W Concrete Curing Compound and Sealer is a curing and sealing material developed for use on interior and exterior colored or uncolored concrete where uniform color and stain resistance is required immediately after placement. Cureseal-W will provide minimal alteration to color. It is a medium-duty sealer with a low-gloss finish. SCOFIELD Cureseal-W meets ASTM C 309 requirements for Liquid Membrane-Forming Compounds, and is VOC compliant in all states and jurisdictions except SCAQMD.

Where to use Cureseal-W:
Existing or freshly placed concrete that is above grade or on ground that is well drained.

SCOFIELD® Repello® FPS
Water & Stain Repellant

Water-based
Clear
VOC = 5.1 g/L

Tech-Data and SDS

SCOFIELD Repello FPS is a proprietary blend of inorganic fluorinated polysiloxane polymers designed to deeply penetrate porous cementitious surfaces and render them both water repellent and resistant to staining from oils, sugar, and common foods. It is barely perceptible when dry, and can be used on stamped, etched, sand blasted, or surface retarded concrete slabs and structures. SCOFIELD Repello FPS is VOC compliant in all states and jurisdictions.

Where to use Repello FPS:
Suitable for use on flat, angled, and vertical surfaces. Use to protect kitchen floors, patios, food courts, picnic areas, concrete furniture, or walkways. It can be used to impart water and stain repellency to surfaces treated with LITHOCHROME Chemstain Classic or SCOFIELD Revive Exterior Concrete Stain.

LITHOCHROME® Colorwax™
Concrete Curing Compound

Water-based
Color-matched
VOC = 42.27 g/L

Tech-Data and SDS

LITHOCHROME Colorwax Concrete Curing Compound is a color-matched, low VOC, environmentally sound concrete curing material that can be used to improve the visual uniformity of freshly placed concrete and increase owner confidence of a job well done. It consists of a base and tint. LITHOCHROME Colorwax is formulated to meet ASTM C 309 requirements for Liquid Membrane-Forming Compounds for Curing Concrete, and is VOC compliant in all states and jurisdictions.

Where to use Colorwax:
Exterior concrete intended to remain bare and exposed.

Solvent-Based Sealers and Cure/Seals
Sika Scofield stained concrete floor Scofield solvent-based sealers darken the color of the concrete, and typically are not odorless. They penetrate concrete surfaces more easily, and are longer lasting. They have a fast cure rate, and a wider range of limits regarding temperature and humidity restrictions. Due to low flash points, there could be flammability issues. Consult your state or jurisdiction for air quality limits and regulations.

Scofield solvent-based curing compounds and cure/seals aid in the development of the designed concrete strength. They retain water in the concrete to promote proper cement hydration. The use of Scofield cures and sealers can help minimize unwanted cracking such as surface cracking and shrinkage cracking, and allow for the maximum potential of abrasion resistance of the concrete.

SCOFIELD® CureSeal™ 700
Solvent-based
Clear
VOC = 684.7 g/L

Tech-Data and SDS

SCOFIELD CureSeal 700 is a high solids (25%), styrene-acrylic copolymer solution formulated to achieve both a protective and decorative finish as well as allow the concrete to attain full mix design properties. SCOFIELD CureSeal 700 is a film-forming sealer, which will assist the curing of freshly placed concrete. Not compliant in California, Utah, LADCO, OTC Phase I and OTC Phase II.

Where to use SCOFIELD CureSeal 700:
Apply over fresh concrete for curing the concrete, or over existing concrete to seal and protect.

SCOFIELD® CureSeal ™ 350
Solvent-based
Clear
VOC = 347.6 g/L

Tech-Data and SDS

SCOFIELD CureSeal 350 is a Low VOC, styrene-acrylic copolymer solution formulated to achieve both a protective and decorative finish as well as allow the concrete to attain full mix design properties. SCOFIELD CureSeal 350 is a film-forming sealer, which will assist the curing of freshly placed concrete. Not compliant in South Coast only.

Where to use SCOFIELD CureSeal 350:
Apply over fresh concrete for curing the concrete, or over existing concrete to seal and protect.

SCOFIELD® Revive™ Colored Sealer
Solvent-based
Colored
VOC < 700 g/L

Tech-Data and SDS

SCOFIELD Revive Colored Sealer is a penetrating colored sealer developed for use on interior or exterior surfaces. Revive Colored Sealer gives a monochromatic, coated appearance to concrete. It offers improved durability over water-based sealers. Revive Colored Sealer consists of a base and tint. It is not compliant in California, Utah, LADCO, OTC Phase I and OTC Phase II.

Where to use SCOFIELD Revive Colored Sealer:
Use on existing interior or exterior concrete flatwork or Scofield Texturetop where uniform color and stain resistance is required.

SCOFIELD® Revive™ VOC Colored Sealer
Solvent-based
Colored
VOC < 350 g/L

Tech-Data and SDS

SCOFIELD Revive VOC Colored Sealer is a penetrating colored sealer developed for use on interior or exterior surfaces. It produces a gloss finish that is resistant to blushing and will not yellow with age or exposure to ultraviolet light, providing significant protection against ultraviolet degradation of the substrate. Revive VOC Colored Sealer consists of a base and tint. It is not VOC compliant in California.

Where to use SCOFIELD Revive VOC Colored Sealer:
Use on existing interior or exterior concrete flatwork or Scofield Texturetop especially where there may be color imperfections caused during application or by wear and tear.

Sika Scofield concrete color - Changing the Way the World Looks at Concrete.
Sika Corporation
Sika Scofield Sales Office
4155 Scofield Road
Douglasville, GA 30134
Phone: 800-800-9900
Sika USA